Unsolved
This post is more than 5 years old
2 Posts
0
153664
dell 6400 inspron Monitor proplem Msg: Error code 2000-0321. Msg: Unable to detect LCD
hello,
my notebook is in my signature,
here is my problem, there is a proplem as shown in pic.
[/URL]
graphics card is a standard one with the intel integrated graphic card (on board i mean). my screen is 15.4' inches but the last 2 inches of the wide screen is just pitch black. Also the screen is very gloomy and not dark even though the screen brightness is max out. the screen must be 1024*800 but in this position it is 1024*768. I ran dignostic test and receive the following LCD message. Error Code 0321. Msg: Error code 2000-0321. Msg: Unable to detect LCD
i am still thinking if this is a hardware or software problem.
help me plsssssssssss!!!!
Message Edited by matrak on 02-29-2008 09:58 AM
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
February 29th, 2008 12:00
matrak
2 Posts
0
February 29th, 2008 13:00
i add the picture of my laptop proplem in my message.
http://img406.imageshack.us/img406/6562/dell6400c281ekranlcdmongm3.jpg
it is the display of screen when the lcd screen has a proplem (resolution is 1024*768) . but the resolution must be normally 1024*800
martiansam
4 Posts
0
October 4th, 2008 14:00
Hey I have exactly the same problem. My screens also looks the way your does and I get the error code 2000-0321 in Dell diagnostic.
Was your problem solved? If yes what was the solution? Please help.
nikolego
9 Posts
0
July 2nd, 2010 20:00
once again I disagree with your answer, I have had three screens on this thing at this point and the first one did the same exact thing as the picture, now I have no screen. I have a backlight working but no screen. If it's hooked up externally it works just fine. Reseating the cable numorous times and still nothing. What other answers do you suggest trying that have worked on prior customers that have had success?
ABadZ06
1 Message
0
April 3rd, 2011 14:00
The same thing was happening on my Inspiron 1545. What ended up being wrong was that there was a kink in the LCD ribbon. I flattened it out and it works perfect again. Here's the "how-to" to get to the ribbon. I didn't need to go as far as replacing the cord, so I stopped at step 8. Hope this helps!
http://blog.parts-people.com/2011/01/19/dell-inspiron-1545-lcd-display-removal-and-installation/