This post is more than 5 years old
15 Posts
0
9788
PC 8024F iSCSI through eth ports
I have a CX4-120 , PC8024F and several hosts. I am using 10g iSCSI to connect several of the host. I do not have a 1g iSCSI mod for the cx4 and wanted to know if I can connect to the 4 ethernet ports to get iSCSI traffic to 1 of the hosts.
So , fiber from CX to SFP on the 8024F and I want to connect ethernet to the 4 ethernet ports on the 8024 to a host. Will traffic run this route?
I know the 4 etho ports will slow to 1g.
bh1633
909 Posts
1
December 8th, 2010 23:00
yes. note that ports 21-24 are combo ports. This means you can either use the rj45 ports or the sfp ports 21-24 at one time.
J_4
15 Posts
0
December 9th, 2010 05:00
Thanks !