Unsolved
This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
11389
Dell 2800 raid controller error
Hi All. Have DELL powerege 2800. Today i'm update PERC4 controller firmware (install this: LSI Logic-Firmware Version:
522D, A17), then configure raid 1 wint 2 drives 36.4 gb and install linux.
After reboot i see:
1 Logical Drives Found on host adapter
1 Logical Drives handled by BIOS
and then my server stop boot. I'm waiting for 3 hours, but he did not boot.
after reboot have same problem.
Press any keys not help.
Interestingly, when the first reboot before installing Linux, everything booted well
Please tell me how to solve this problem.
Best regard
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
July 16th, 2012 07:00
IPF,
Would you access the Perc 4 BIOS (Ctrl-M) then select CONFIGURE - then SPECIFY BOOT DRIVE. Enter the number of the Linux array. Exit out and see if OS boots.
Let me know how it goes.
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
July 16th, 2012 07:00
So it won't let you access the BIOS?
Take the server to a minimum to post configuration, that is removing everything from the server but the following.
System Board
Processor
One stick of memory in DIMM1-A or DIMM1-B
Power supply
Riser
Control panel (power button - only required if the last power state was off)
After removing everything then try to boot the server again and see if it is completing POST.
If so then add each removed device back to the server until it stops again, then we know the part causing the issue.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 16th, 2012 07:00
I select specify boot drive in prec4 bios, but in not boot, because stop after show this:
1 Logical Drives Found on host adapter
1 Logical Drives handled by BIOS
Then see only A blinking cursor ( as like _ )
. When it work good , i see drac configuration and other , but now i not see it , and not go to motherboard bios (when press F2) (
. Maybe my LSI logic card faulty?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 16th, 2012 07:00
Tomorrow I'm going to work and check everything. Before flashing the Riser card, I noticed no problems.