This post is more than 5 years old
2 Posts
0
18725
HDD configuration on Dell PowerEdge R610
Hi all, I have some questions regarding HDD configuration on Dell PowerEdge R610.
Is it possible to use 1 SAS (146Gb) as OS partition and 3 SAS (2x600Gb) as data partition.
Or another alternative 1 SAS (146Gb) as OS partition and 3 SATA (3x1TB) as data partition.
thanks
Kimi
DELL-Geoff P
990 Posts
1
November 20th, 2012 07:00
yes, it can be done. You would create a RAID 0 for the OS on one drive, and your data can be on a RAID 5 on the remaining drives. Just remember, there is no redundancy on the RAID 0 if the drive crashes.
Regards,
kimi29
2 Posts
0
November 20th, 2012 17:00
Hi Geoff, that means the 2 RAID can be configure under 1 RAID controller?
Thanks
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
November 20th, 2012 17:00
Yes. The PERC can support up to 64 virtual disks (RAID arrays) on one controller.