Unsolved
This post is more than 5 years old
11 Posts
0
58001
Equalogic MP: offline Volumes
Hi everyone!
Any idea how to handle (manually) offline volumes in the SCOM Management Pack?
Unfortunately the MP raises an alert and changes to unhealthy state as soon as a volume is offline, even if it is configured by admin.
Because the volumes are not discovered as class-instances, there is no change to configure an override.
Thanks in advance,
Patrick
Thomas_Jacob
21 Posts
0
March 14th, 2013 00:00
Needed to clarify: What version of the MP are you using?
Is this the "Dell EqualLogic : SCSI Logical Unit Status Changed" alert (available in 5.0 onwards) or the "Dell EqualLogic : Volume Group Health Notification Alert"?
SystemCenterRoc
11 Posts
0
March 14th, 2013 02:00
Hi Thomas Jacob!
Im currently not onsite but the newest one what should be 5.0.
Thanks,
Patrick
Thomas_Jacob
21 Posts
0
March 19th, 2013 00:00
Can you please also confirm which alert (from the two mentioned above) this is?
(One is generated by a unit monitor and the other is generated by a rule)
SystemCenterRoc
11 Posts
0
March 20th, 2013 07:00
Hi!
From the montior. The alert is: "Dell EqualLogic : Volume Group Health Notification Alert"
Thanks,
Patrick
Thomas_Jacob
21 Posts
0
March 21st, 2013 10:00
Thomas_Jacob
21 Posts
0
March 21st, 2013 10:00
typo in my earlier response: it should read: "we do exclude replica volumes from the health computation..."
SystemCenterRoc
11 Posts
0
March 28th, 2013 02:00
Thomas,
thanks for your reply! So we will get a new version of the MP?
Cheers,
Patrick
SystemCenterRoc
11 Posts
0
April 9th, 2014 03:00
keyaertc
1 Message
0
March 4th, 2015 03:00
hey Team,
I've have the exact same problem at a Customer. A few volume are offline, I've got the alert in SCOM, and I cannot fine tune it :(