Unsolved
This post is more than 5 years old
7 Posts
0
12079
DMPVV - Updating iDRAC Certificate causes Connection Profile testing to fail - Can't deploy Firmware
Hi All
Any help on this issue would be greatly appreciated as I'm not too familiar with DMPVV or certificates in general!
It seems after signing an R815 iDRAC with a certificate from our AD based CA that I am unable to successfully test the iDRAC credentials in the 'Test Connection Profile'. I have also uploaded a certificate to the DMPVV appliance.
If I run racadm sslresetcfg to restore the iDRAC certificate to a default self signed certificate then this test passes without an issue.
As it is unable to pass the test if I apply a certificate, the firmware deployment wizard will fail with the following errors in the log...
| ERROR | Jun 4, 2013 at 4:19:51 (GMT) | iDrac Inventory failed for host testhost.testdomain with iDrac 10.x.x.x. Reason: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target |
| ERROR | Jun 4, 2013 at 7:55:09 (GMT) | Updating firmwares for iDRAC 10.x.x.x was Failed |
| ERROR | Jun 4, 2013 at 7:55:09 (GMT) | [Firmware Update] Update process failed. Connection with iDRAC: (10.x.x.x) was failed for host: (testhost.testdomain) or access was denied for the given credentials. Please check the given iDRAC credentials or the network connectivity. |
| ERROR | Jun 4, 2013 at 8:03:22 (GMT) | Connection with iDRAC was failed or access was denied for the given credentials. |
| ERROR | Jun 4, 2013 at 8:04:08 (GMT) | Host Configuration Failed: Task(s) 1 of 1 failed. |
Regards,
Marty