This post is more than 5 years old
29 Posts
0
433174
PowerEdge 2950 with PERC 6/i - issue under install no hdd found
Hi i just got a server used...
Im want to install windows 2003 x64 because it have more then 4gb ram.
So i begin du create the VD and so on but get stuck when i want to install the OS - because it cant see the Hdd
The info is:
PowerEdge 2950 with a PERC 6/i
Package version 6.0.2-0002
Bios: NT13-2
I want to update the firmware but how do i do that?
The driver i found on dell hp. is this one
2.0 Compatibility / Minimum Requirements ======================================== This device driver requires the following minimum Operating System version: Windows Server 2008 x64 Edition Minimum PERC 5 FW package version: 5.2.2-0072 Minimum PERC 6 FW package version: 6.2.0-0010 Minimum CERC 6 FW package version: 6.2.0-0010
http://www.dell.com/support/drivers/dk/da/rc1077943/DriverDetails/Product/poweredge-2950?driverId=M4F88&osCode=LHS64&fileId=3176100602&languageCode=DA&categoryId=SF#OldVersion
Dell PERC 5/E Adapter, PERC 5/i Integrated, PERC 5/i Adapter, PERC 6/E Adapter, PERC 6/i Integrated, CERC 6/i Integrated, PERC 6/i Adapter, PERC 6/i Integrated Blade Windows Server 2008 x64 driver
This package provides the Windows 2008 x64 driver for Dell PERC 5/E Adapter, PERC 5/i Integrated, PERC 5/i Adapter, PERC 6/E Adapter, PERC 6/i Integrated, CERC 6/i Integrated, PERC 6/i Adapter, PERC 6/i Integrated Blade
Udgivelsesdato: | 09-05-2012 |
Vigtighed: | Anbefalet |
Version: | 2.24.0.64,A03 Se forrige versioner |
Any one having a guide to do this cause right now i cant use the server at all...
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 16th, 2013 09:00
Not sure why it gave me 7.2 when I selected 2003x64, but the last version that specifically mentions 2003x64 is 6.5:
www.dell.com/.../poweredge-2950
Be sure to follow the Installation Instructions found on the download page for each ISO.
Bushimoo
29 Posts
0
July 16th, 2013 09:00
dobbel post edited
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 16th, 2013 09:00
Might be the same file, but it is not a Dell download ... be wary of non-Dell downloads (even if it is an EDU ... EDU sites are not always monitored internally).
Actually, it is not the same ... that link is for 6.5.0 ... the one I linked is 6.5.3 ... sometimes those x.x.something sub-versions can be for only a small number of systems, so while 6.5.0 might work, it might only be for a few systems (perhaps not even for a 2950).
Bushimoo
29 Posts
0
July 16th, 2013 09:00
ok i download SSU v7.2 and try the older driver in meanwhile
Dell PERC 5/E Adapter, PERC 5/i Integrated, PERC 5/i Adapter, PERC 6/E Adapter, PERC 6/i Integrated, CERC 6/i Integrated, PERC 6/i Adapter, v.2.14.0.64, A05
PERC5,PERC6,CERC6 device driver for W2K3 x64 Version: 2.14.0.64
Release Date: 11/20/2007
Importance: Recommended
Bushimoo
29 Posts
0
July 16th, 2013 09:00
is this file not the same as the 4 sep above?
mirrors.vbi.vt.edu/.../om650_suu_a00.iso
Bushimoo
29 Posts
0
July 16th, 2013 09:00
the older driver worked :D 2.14.0.64:
www.dell.com/.../poweredge-2950
after im finish installing the OS Windows 2003 R2 x64
What the fastest way to upgrade the drivers and firmware? running the SUU 7.2?
Bushimoo
29 Posts
0
July 16th, 2013 10:00
SUU 6.5.3 supports the following PowerEdge systems running the supported
Linux and Windows operating systems:
R710, R610, T610, T710, R410, M710, M610, T410, 810, R510, T310, T110,
R910, R210, R815, R310, M910, R715, M610x, R515, R415, M710HD, R210,
M915, T110
800, 850, 830, 860, 840, M605, R200, M600, R900, T105, R805, R905, T605,
R300, T300, T100, M905, M805,
6950, 1955, PE2950, 1950, 2900, 1900, 2970,
6800, 6850, 2850, 1800, 800, 1850, 2800, 1855, SC1425,SC1435
i try too find the 6.5.0 see if my pe2950 is listed in that version
Bushimoo
29 Posts
0
July 16th, 2013 10:00
when i Previous Version i only get these??
Previous Versions
7.2.1, A01 6/14/2013 8:50:13 PM
7.1.1, A00 10/19/2012 5:59:39 AM
7.0.0, A00
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 16th, 2013 10:00
The 2850(?) and the 2950 are both listed for 6.5.0:
www.dell.com/.../DriverDetails
Bushimoo
29 Posts
0
July 16th, 2013 10:00
nice i download that version - it contain the lasted updates firmware and driver that work under windows 2003 x64
File Format: ISO Image Download File Download File
Add To My Download List Add to My Download List
File Name: cdu_1.6_core_173_A01.iso
Description: This file contains an ISO image used to create a CDROM. Download the file to a folder on your hard drive, then create a CD using your preferred CD burning software.
Download Type: HTTP
File Size: 1299MB
Bushimoo
29 Posts
0
July 16th, 2013 10:00
mistyped i mean PE2950
Bushimoo
29 Posts
0
July 16th, 2013 15:00
could u provide der same driver for 2003 x86? link?
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
July 16th, 2013 16:00
2.14.0.32 on 2003x86 (hard drive version):
http://www.dell.com/support/drivers/us/en/555/DriverDetails/Product/poweredge-2950?driverId=CYVK1&fileId=3000719987&osCode=WNET