Unsolved
This post is more than 5 years old
615 Posts
0
105776
Racadm command to view LC jobqueue on iDRAC6?
On iDRAC7 I can run:
racadm jobqueue view
and that will show me the lifecycle controller jobs.
On iDRAC6 that command is not valid so is there a way to see the queue with a racadm command on iDRAC6? There is noting discussing job or queue or jobqueue in the racaadm command pdf for 6.
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
January 13th, 2014 22:00
Cameron,
iDRAC6 does not have any racadm commands for viewing job queue. You can use below WSMAN command to get job status
winrm e cimv2/root/dcim/DCIM_LifecycleJob -u:root -p:calvin -r:https://< iDRAC IP >/wsman -skipCNCheck -SkipCACheck -encoding:utf-8 -a:basic
cameronredux
615 Posts
0
January 14th, 2014 02:00
Thank you for the command. Wish I didn't need to access a windows machine to do that.
steven_zessin_D
50 Posts
0
January 14th, 2014 05:00
All winRM commands have a wsman linux version. See section 10.2.3:
http://en.community.dell.com/techcenter/extras/m/white_papers/20066181.aspx
high level
http://www.delltechcenter.com/LC
steve
cameronredux
615 Posts
0
January 14th, 2014 09:00
Excellent!
Thanks Steve looks like I have some work to do. Will I need to get openwsman compiled on my server for those scripts to run?
steven_zessin_D
50 Posts
0
January 14th, 2014 09:00
Check out this link. May not need to recompile.
http://en.community.dell.com/techcenter/systems-management/w/wiki/4139.web-services-management-wsman-linux-client-installation-setup.aspx
steve
cameronredux
615 Posts
0
January 14th, 2014 10:00
Very helpful. Thank you!