This post is more than 5 years old
1 Message
0
32281
Setting up a RAID 1 configuration
Hello,
I have an Optiplex 9020 with a single hard drive that I would like converted to a RAID 1 configuration.
Is there any literature on how to setup a RAID 1 on these specific computers?
Thanks!
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
March 4th, 2014 19:00
RAID and non-RAID on the onboard/Intel RAID controller (available only on desktop model) are not compatible, so you would have to reinstall in RAID mode. Alternatively, you could use the OS to configure a mirror in Disk Management (if you have Windows x Professional or higher).
rdunnill
6 Professor
6 Professor
•
8.8K Posts
0
March 4th, 2014 09:00
musical9
2 Posts
0
April 10th, 2014 06:00
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
April 10th, 2014 12:00
No, I meant "desktop" as opposed to the "All-In-One" version of the 9020.