Unsolved
This post is more than 5 years old
16 Posts
0
29435
6224 web UI - default IIS page?
Hi
Today when i browse to 6224 web UI management page i got IIS default page instead of login page.
console#show ip interface management
IP Address..................................... 10.1.1.1
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 0.0.0.0
IPv6 Administrative Mode....................... Enabled
http://10.1.1.1 -> IIS default page
https://10.1.1.1 -> Cannot find page
Any idea whats wrong? Thanks!
eth.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 25th, 2014 07:00
Is https enabled on the switch?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 25th, 2014 08:00
Commands should look like this.
console(config)# crypto certificate 1 generate
console(config-cert)#key-generate
Console(config)# crypto key generate dsa
Console(config)# crypto key generate rsa
console(config)# ip https server
ethaniel86
16 Posts
0
June 25th, 2014 08:00
HTTP is enabled as i checked
console#show ip http
HTTP Server is Enabled. Port : 80
ethaniel86
16 Posts
0
June 25th, 2014 08:00
how do i configure that?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 25th, 2014 09:00
right, but we are worried about accessing the switch through https, right?
ethaniel86
16 Posts
0
June 26th, 2014 09:00
Hi Daniel
I have enabled https but https://10.1.1.1 still not loading. If success i should see login page right?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
June 26th, 2014 11:00
Can you post the running config for us to look over? Are you trying to access from the same subnet as the switch? Have tried different browser?
ethaniel86
16 Posts
0
July 1st, 2014 21:00
Is this the one?
console#show running-config
!Current Configuration:
!System Description "PowerConnect 6224, 3.3.10.3, VxWorks 6.5"
!System Software Version 3.3.10.3
!Cut-through mode is configured as disabled
!
configure
stack
member 1 1
exit
ip address 10.1.1.1 255.255.255.0
username "admin" password ***** level 15 encrypted
exit
The computer accessing the switch has IP 10.1.1.50. subnet 255.255.255.0. RJ45 is plugged into the same switch 10.1.1.1.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 2nd, 2014 07:00
Thanks for the extra info. Based on the running config, I do not see where HTTPS is enabled. did you run the commands I provided?
What is the output from
console#show ip https
ethaniel86
16 Posts
0
July 3rd, 2014 23:00
Ops. I rebooted the switch previously i think the config is gone. I have enabled https now.
console#show running-config
!Current Configuration:
!System Description "PowerConnect 6224, 3.3.10.3, VxWorks 6.5"
!System Software Version 3.3.10.3
!Cut-through mode is configured as disabled
!
configure
stack
member 1 1
exit
ip address 10.1.1.1 255.255.255.0
ip https server
username "admin" password ****** level 15 encrypted
exit
I'm still getting the connection was reset when browse to https://10.1.1.1
ethaniel86
16 Posts
0
July 4th, 2014 00:00
I think i found where the problem is. I have one VMware adapter with IP 10.1.1.1. Disabled it and i can browse 6224 switch web GUI.
Thanks!
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 7th, 2014 06:00
Good to hear you got it working. Thanks for keeping us posted.