Unsolved
This post is more than 5 years old
9 Posts
0
7099
C10LE Not Keeping Config After Reboot
C10LE Not Keeping Config After Reboot
I am new to the Wyse world and having a small issue with my C10LE. 7.0 113
I have a wnos.ini file create exactly how I want it hosted on the FTP server. The thin client boots, pulls the file and it is exactly how I want it.
If I reboot the device, I loose all my custom settings. Reboot it again and get my settings back. Basically it flip flops between settings at ever reboot.
What am I missing to make this device run my config after every reboot?
wnos.ini
Code:
;*************************************************************
;* *
;* This wnos.ini file was generated with the *
;* Configuration File Generator 6.0.011 *
;* Copyright by Thomas Moellerbernd *
;* *
;* http://www.technicalhelp.de *
;* *
;*************************************************************
;*************************************************************
;* General 1 *
;*************************************************************
Fileserver=10.1.4.69
Rapportserver=10.1.4.69
Privilege=None SuppressTaskbar=yes
;*************************************************************
;* General 3 *
;*************************************************************
AutoSignoff=yes Shutdown=yes
;*************************************************************
;* Display *
;*************************************************************
Screensaver="30" LockTerminal=no Type=0
;*************************************************************
;* Time *
;*************************************************************
Timeserver=10.1.4.18 Timeformat="12-hour format" Dateformat=mm/dd/yyyy
TimeZone='GMT - 05:00' ManualOverride=yes Daylight=yes Start=030507 End=100507 TimeZoneName="US Eastern Standard Time" DayLightName="Eastern Daylight Time"
;*************************************************************
;* Network *
;*************************************************************
Community=secretcode
SignOn=No
MaxVNCD=1
VncPassword="secretcode" Encrypt=yes
VncPrompt=Yes Accept=5
;*************************************************************
;* RDP *
;*************************************************************
SessionConfig=RDP DefaultColor=2
;-------------------------------------------------------------
;- RDP Session 1 -
;- Each line but the last must end with a '\' -
;-------------------------------------------------------------
CONNECT=RDP \
Host=termserv \
Description="Office" \
AutoConnect=1 \
Reconnect=yes \
Colors=true \
Fullscreen=yes \
Rdp_No_Wallpaper=yes \
Rdp_No_Theme=yes \
UniSession=yes \
Domainname=DOMAIN \
Mapdisks=yes \
LocalCopy=no
psmith-2015
9 Posts
0
July 1st, 2015 04:00
RESOLVED
If I add to the wnos.ini
EnableCacheIni=yes
Once that is added the thin client holds the settings after every reboot.