Unsolved
This post is more than 5 years old
1 Message
0
22989
Bricked D90D7
Bricked D90D7
Hopefully someone can help with the following issue:
Having taken an image from a D90D7 of a configured machine and then applying this to another D90D7 using Acronis ABR, the machine doesn't boot it just hang's saying "GRUB"
I have downloaded the USB Firmware Tool and the latest WES7 build for the D90D7 from the Wyse support website i then create a USB Bootable disk with the USB firmware tool to push the image to the machine, however when trying to boot from the USB drive them system just stop's at "Remove Disks or other media" press any key to restart.
What am i doing incorrectly to resort this back to a default system / OS?
CharlesR-2015
4 Posts
0
May 18th, 2015 08:00
Have you entered the BIOS, enabled bootable USB media? Once you've done this the key to select bootable media is P, just spam that while its booting up.
vip_kass
25 Posts
0
May 28th, 2015 08:00
Make another boot stick with a older version of Wyses USB tool, if the image and USB tool do not match or at least or a few version different then I get this error.