Unsolved
This post is more than 5 years old
1 Message
0
3703
Dual VGA Monitors with a Wyse R10L
Dual VGA Monitors with a Wyse R10L
Hi, we have recently purchased multiple R10L's believing that with the DV20 splitter we could have dual VGA monitors running a span RDP session in terminal server. Our IT consultants have installed TCX but the monitors are just giving a mirror of each other - and not two separate displays. Anyone know definitively if it's possible to run dual VGA or not? We seem to be getting conflicting feedback ...
any help would be greatly appreciated,
Leasa
DPetropolis
62 Posts
0
June 30th, 2015 06:00
DV20 is only compatible with the C & V Hardware classes
The DV20 adapter is only compatible with the C & V hardware platforms. Since both of those platforms have a single DVI port they are physically wired to support splitting two monitors using the DV20. The R10L however, has two physical DVI ports which are each independent of one another.
The R10L platform will support a DVI + VGA configuration or a DVI + DVI configuration.
Hope this helps.