Unsolved
This post is more than 5 years old
20 Posts
0
73561
How to manage a CMC(M1000e) in OMPC
Hallo
Wie kann ich korrekt die Blade Chassis in OMPC abfragen. Mit welchem Protokoll muss man die CMC eintragen, damit sie korrekt angezeigt werden können und die Daten abfragen können.
Hello
How can i Access the Power Infos from a PE-M1000e-Chassis ?
What a protocoll shall i use to checkup and to get the Power Infos for OMPC(3.1)?
OMPC = 3.1
CMC = 5.0
Greetings
Martin
DELL-Pavan K
18 Posts
0
September 22nd, 2015 02:00
Hi Martin,
Please discover with WSMAN Protocol.
Thanks
Pavan
DELL-Sonylal P
29 Posts
0
September 22nd, 2015 03:00
Hi,
If you want to monitor the power reading individually from the blades as well as from CMC, please follow the below steps.
1. Discover the chassis using WSMAN protocol
2. Discover the individual blades using IPMI protocol
You may add both steps in same discovery task.
Regards,
Sonylal
m_staab_4de2bd
20 Posts
0
September 22nd, 2015 03:00
It works so fine, but after the discovering it shows
it says "lost Connection" .... why ?
DELL-Sonylal P
29 Posts
0
September 22nd, 2015 05:00
If you discovered only CMC, the blades will be shown as disconnected. Please make sure you have discovered the blades using correct IPMI credentials.
Thanks,
Sonylal
YemBot
11 Posts
0
February 8th, 2017 11:00
Hi.
I'm running OMPC 3.2 and I'm having trouble connecting to an M1000e running 5.21 CMC firmware. I try to discover via WS-MAN but the device status shows disconnected. Can you help me troubleshoot? I have no trouble discovering the blades via IPMI.
-------
Yemi
DELL-Sonylal P
29 Posts
0
February 8th, 2017 20:00
Hi,
Thanks for using OpenManage Power Center. If I understood the question correctly you were able to discover the M1000e however the nodes/blades are showing disconnected.
To solve this issue please run an IPMI discovery with blades IP address.
Hope I answer your question correctly. Please let me know the result.
Thanks,
Sonylal
YemBot
11 Posts
0
February 9th, 2017 13:00
Hi Sonylal.
My problem is the opposite of what you describe: I discover the M1000e enclosure via MSWAN but it is reported in the disconnected state.
No problem with the blades via IPMI discovery. See my attached image.
M1000e is running 5.21 CMC firmware and I'm using OMPC version 3.2.
------
Yemi
DELL-Pavan K
18 Posts
0
February 9th, 2017 21:00
Yemi,
We see that chassis is showing unexpected model name.
Hopefully Chassis firmware is successfully updated.
If not then request you to create a support ticket with Dell to enable us to access the log files and find the exact root cause
Thanks
Pavan
DELL-Pavan K
18 Posts
0
February 10th, 2017 01:00
Great ..Can you share the current image showing the model name?
Thanks
Pavan
YemBot
11 Posts
1
February 10th, 2017 01:00
Hi.
I've resolved the issue! Everything works fine when I provide a full IP address instead of just the hostname. Chassis discovery is now working as expected along with the associated blades.
Thanks.
Yemi