This post is more than 5 years old
6 Posts
0
7958
Precision Tower 5810, MDT, Windows 7: Storage Drivers (IASTORA.SYS)
I've been deploying windows 7 for quite some time without issue with MDT. I'm generally familiar with storage driver issues but this machine has me stumped.
After successfully booting to PXE windows PE environment and loading the image to the drive, I keep getting hit with the "Windows failed to start, IASTORA.SYS, 0xc0000098, Required file in missing or corrupt" error on the first reboot. -So it appears the wrong storage driver is loading.
I have done the following:
I have realized the machine name changed from Precision 'T5810' to 'Tower 5810' (So my driver selection profile is correct)
Driver selection profile is both the 5810 CAB as well as files loaded from the service tag page -I've attempted to scale back older drivers thinking that perhaps an older bad copy is loading. I think I'm loading v4.3
I've injected drivers into the WIM image using DISM just in case. (including the Samsung NMVe drivers)
I've attempted to use windows repair -it can't find the issue... also loaded drivers there without helpful results.
Drivers (I think) are the intel drivers with Plug and Play ID VEN 8086, DEV 8D62
-I verified this because I can load windows 7 using the recovery DVD and there I saw the storage drivers loaded...
For everything above I have cycled between SATA emulation ATA, ACHI, RAID
BIOS looks good I think.. Secure boot is off, legacy options on.... Nothing umping out at me
It's driving me batty...
Denver_80211
6 Posts
0
October 13th, 2016 14:00
Appears to be in the intel scsi adpater family "iaAHCI v4.3.0.1198"
Hop this helps someone else on the search
DELL-Jesse L
Moderator
Moderator
•
16.7K Posts
0
October 12th, 2016 11:00
Denver_80211,
Did you downloaded the Intel Rapid Storage Technology Driver and install it into the system? Click the link to download drivers on the Precision 5810.
Denver_80211
6 Posts
0
October 12th, 2016 12:00
90% sure I have but I will try again. might take few hours before I can test... meetings meetings
Denver_80211
6 Posts
0
October 12th, 2016 13:00
Verified and refreshed the rapid storage drivers. same result
Denver_80211
6 Posts
0
October 13th, 2016 07:00
My replies keep going no place.. tried the suggested drivers -no luck
Denver_80211
6 Posts
0
October 13th, 2016 12:00
After three days of tests (takes a while to load the OS each time):
Running!!!!! Looks like there is a bad driver the 5810 CAB (Error started right after loading the CAB and it stopped when I ripped out the drivers to narrow down what's tripping this up)
I'll start piecing together which driver is the problem child as best I can... hope to find it and post here