Unsolved
This post is more than 5 years old
3 Posts
0
2574
How to get PowerData values for 15 minutes range?
Hi all,
I would like to get PowerData (Min,Avg,Max) power for last 15minutes interval per server. The same set of data as you can see in Devices->Device->Power History.
How to do it via restapi?
OPMC 4.0
Thank you for your support in advance.
Regards,
Peter
DELL-Sonylal P
29 Posts
0
September 12th, 2017 03:00
Hi Peter,
Using RestAPI rawdata report you can get 1 hr power values (Min, Avg,Max).
For more details please refer the latest RESTAPI guide.
en.community.dell.com/.../20444217
Can I know the specific requirement behind the 15 minute ask?
Regards,
Sony
PVi1
3 Posts
0
September 12th, 2017 05:00
Hi Sony,
thank you for quick response.
At least here in Europe, 15 minutes maximum is the base value for billing, accounting and ordering of dedicated/reserved power capacity from your electricity supplier. So it is absolutely fundamental value in DC environment.
You can find more about it here:
https://www9.nationalgridus.com/niagaramohawk/non_html/eff_elec-demand.pdf
http://circutor.com/en/documentation/articles/973-how-to-avoid-maximum-demand-penalties-in-your-electricity-bill
http://www.think-energy.net/KWvsKWH.htm
I would like to ask you if it is possible to add this functionality and if so, in what time frame approximately?
Thank you for your support.
Best regards,
Peter
DELL-Sonylal P
29 Posts
0
September 13th, 2017 02:00
Hi Peter,
Thanks for the details. I appreciate your suggestions and feedback.
Could you drop a mail to Lori_Matthews@Dell.com to know about the possibility?
Regards,
Sony
PVi1
3 Posts
0
September 14th, 2017 09:00
Hi Sony,
thank you for your support.
I have contacted Lori via email and waiting for her response.
Regards,
Peter