Unsolved
This post is more than 5 years old
1 Message
0
7456
Reset password to login R1-2210 VRTX 10Gb Switch.......
Hi to everyone....
I cannot able to login throught "Launch I/0 Module GUI" in R1-2210 VRTX 10 GB Switch
(VRTX CMC-DSH0G82 Environment)
Does anyone know how can I reset username and password of this module?
Thanks an advance
Giorgio
Dev Mgr
4 Operator
4 Operator
•
9.3K Posts
0
January 23rd, 2018 18:00
If you SSH into the CMC, you can then do a "connect switch-1" to get into the serial connection of the switch. Assuming you didn't set security up to force logging in via serial too, you can change the password from the serial prompt.
The other option is via the CMC's switch fabric option (where you can also set the IP address).
Infra-Team ES
5 Posts
0
November 5th, 2023 17:49
From CMC CLI; you can ssh to the ip of the CMC and then:
racadm racresetcfg -m switch
that will reset the switch.