This post is more than 5 years old
5 Posts
0
21507
How to add additional programs (mcafee, ms office) to WIM File
Hi all,
I am new here. First time using Dell image assist. I am able to create the image file and customize, but i m not sure when to add additional applications to the image.
- After Sysprep or before
Please help
DELL-Tyler M
Moderator
Moderator
•
309 Posts
1
September 21st, 2017 14:00
Awaisarwar -
As part of the ImageAssist process, Sysprep will be run on the OS.
Regarding applications, it's dependent upon your requirements and or the type of application. If you want a "thick image" (applications included on the Gold image), many applications can be installed prior to ImageAssist running the Sysprep process. Some applications are not compatible with ImageAssist prior to Sysprep. Those apps would need to be staged either on the image or on a network location where they can be installed at first logon; either through scripting in the image or via group policies, SCCM, etc.
Examples of acceptable applications which can be installed prior to Sysprep:
Examples of applications which should be installed post deployment:
Note: During the ImageAssist process, before it runs Sysprep - the tool will perform a series of validation checks. One of the items it looks for are applications which will prevent the process from running. If it finds applications that are not compatible, it will list them and attempt to remediate the validation by removing the applications so that the validation can pass successfully.
The URL below contains some useful links & articles to get you going.
http://en.community.dell.com/techcenter/enterprise-client/f/4916/t/19674959
Thank you,
Tyler
ed_goldberg
43 Posts
0
September 21st, 2017 13:00
Hello,
On a clean hard drive with all partitions removed, install the O/S, applications, then install and run ImageAssist from the green blinking "Guide Me" button. ImageAssist will then validate it, run sysprep and after sysprep completes it will reboot to begin the auto capture process.
Awaisarwar
5 Posts
0
October 4th, 2017 03:00
Hi Tyler,
Thanks for your quick reply. It was really helpfull. I have following situation.
These are my concerns, I know these are very specific.
DELL-Tyler M
Moderator
Moderator
•
309 Posts
0
October 4th, 2017 10:00
Hi AWAISARWAR -
You're welcome. Please see my responses below.
[View:/cfs-file/__key/communityserver-discussions-components-files/4916/Configure_5F00_W10_5F00_Accounts_5F00_Reference_5F00_Build.mp4:550:0]
Awaisarwar
5 Posts
0
October 5th, 2017 10:00
Hi Tyler,
Finally I made it. I installed all the programs including antivirus.
One last thing..
When login as with the account i create, it has lost the customise settings and dell image assit application still installed. I beleive it must be uninsatlled automatically.
Really appreciate your reply.
You are real hero.
awais
DELL-Tyler M
Moderator
Moderator
•
309 Posts
0
October 6th, 2017 09:00
awais,
Good to hear you're making progress. Depending on what settings were customized, the Sysprep process may prevent certain items from carrying over. If performed correctly, customizations to the desktop background, start menu & desktop shortcuts will carry over to all newly created users. This requires use of the local Administrator account when customizing and the "COPY Administrator's profile to Default User profile" option must be selected in the Unattend XML creator. ImageAssist utilizes the CopyProfile function of Windows Sysprep to enable this functionality. With the introduction of Windows 10, Microsoft has developed some new solutions to help customize items beyond what CopyProfile is capable of. I've included some links with more information below.
Thank you,
Tyler
Awaisarwar
5 Posts
0
October 24th, 2017 10:00
Dear Tylor, Thanks for your patiene and writing in details. One last thing, Now i have WIM file captured /copied in separate usb and refernce image (in bootble usb). As you know the bootable usb when i created it wa formatted in FAT32. It has a capacity of only 4Gb. I have the WIM of 7Gigas. Now I know to send this bootble usb and wim file in a single usb. How can I make this. Cheers, Awais
DELL-Tyler M
Moderator
Moderator
•
309 Posts
1
October 25th, 2017 08:00
Awaisarwar -
You're welcome. For this, you can use the WIM splitter tool provided in the direct tool links of the main ImageAssist interface.
Thank you,
Tyler
Awaisarwar
Awaisarwar
5 Posts
0
February 17th, 2018 23:00
Hi Tyler,
Again for a quick consultation. Finally created the image and put in production. Now I need to discuss a case here.
Normally when we hand over a newly imaged PC to a user (who is working from home).
At first time logon the windows requires us to enter admin username and password, this is what we want to bypass
and run a script of autologin runonce. I can see an option when you do UNATTENED XML
and can run First Logon commands.
Here I need a script (provide me a good resource link,example how to create AutoLogon at first time logon only)
and what would be the formate. Can I simple type a script in this field e.g C:\Autologon.bat
Thanks for your help.
Awais
ed_goldberg
43 Posts
0
March 5th, 2018 07:00
Hello,
The unattend.xml will need to be modified to reflect the auto logging in with no credential prompt. Below is how to set the auto logon and not prompt for credentials.
Under local system administrator account choose "Enable local system administrator account" and then select how many times the system will auto logon occur. Select the times under local system administrator accounts "When a destination computer starts, automatically login as administrator", here choose the number of auto logins. You should not be prompted for credentials.
ed_goldberg
43 Posts
0
March 5th, 2018 07:00
The unattend.xml will need to be modified to reflect the auto logging in with no credential prompt. Below is how to set the auto logon and not prompt for credentials.
Under local system administrator account choose "Enable local system administrator account" and then select how many times the system will auto logon occur. Select the times under local system administrator accounts "When a destination computer starts, automatically login as administrator", here choose the number of auto logins. You should not be prompted for credentials.
Byteher
4 Posts
0
May 22nd, 2020 08:00
I know this is a very old post but I have an additional question since I am using this same process in our image to automate our company-specific programs via a Powershell script and an automated task that runs on startup.
Is there a way to have the local Administrator account login, BUT, keep the screen locked (or immediately lock it once it is logged in)? This is to keep the possibility of any additional (rogue) software from being installed by the vendor applying the image.
Thank you.
tkoscielniak
52 Posts
0
May 22nd, 2020 09:00
I believe the below example should work. It will lock screen, install an app, then shutdown and reboot in 5 seconds
rundll32.exe user32.dll, LockWorkStation
start /wait c:\apps\example.exe /s
shutdown.exe /r /t 5
Byteher
4 Posts
0
May 22nd, 2020 12:00
Thanks for the commands.
I'm using the below in my ps1 script.
#Pause Script
# Pauses script for specified number of seconds
Start-Sleep -s 3
#Lock Screen Command
# Makes sure user account screen is locked.
$xCmdString = {rundll32.exe user32.dll,LockWorkStation}
Invoke-Command $xCmdString
I added the Start-Sleep command to be able to pause the script log enough for the profile to load before issuing the lock command.
I may have found a way around the situation by changing the "Task Scheduler" task trigger to start "on connection to user session". I'll post when it has been tested.
Byteher
4 Posts
0
June 3rd, 2020 21:00
So I could not get the LockWorkstation to work inside the script, but I just needed to create an additional scheduled task that locked the workstation as soon as the local administrator account logged on. I restricted it to only that account since we use a secondary admin account for our IT. As part of our RMM onboarding that gets installed via this initial image task, we disable the local admin account as one of the steps, taking the security risk out of play.