Unsolved
This post is more than 5 years old
2 Posts
0
5336
unable to change default mgmt IP in MD3820f using GUI
I have Configured MD3820F storage but i couldn't change default Mgmt IP in GUI Mode. I was tried several time but it not change to new IP, please assist us to how to resolve this issue?
Dhanushka- SITS
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
August 23rd, 2018 06:00
Hello AMRDG,
Do you have the serial/ console cable that came with your MD3820f? if you do then you can use that to change your Management IP address. Here are the steps to do so.
NOTE:
Windows Server 2008 does not ship with hypertrm.exe and hypertrm.dll. Customers wanting to use hyperterminal in Server 2008, must copy these two files from a Windows XP system.
NOTE:
Only capital "S" works here, lowercase "s" will not be recognized for this command.
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Please let us know if you have any other questions.
AMRDG
2 Posts
0
August 23rd, 2018 10:00
hello Dell-sam L
thank you for support that working i have been changed IP but then i try to change DNS that also can not change and is it not possible to change from Serial Cable?
or any other way please
AMRDG
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
August 24th, 2018 09:00
Hello AMRDG,
You set the ip address, subnet mask & gateway on an MD3000. There is not a place to change the DNS.
Please let us know if you have any other questions.
Adeir
2 Posts
0
February 12th, 2019 23:00
Hi All,
i have the same problem now. can you help me how to connect with serial cable. and share username password for default.
thanks.
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
February 13th, 2019 07:00
Hello Adeir,
Here are the steps to connect to the serial connection on the controllers so that you can change the IP address.
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Please let us know if you have any other questions.
delafjor
1 Message
0
February 20th, 2019 08:00
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
February 20th, 2019 12:00
Hello delafjor,
Here is the Dell part#MN657 for the password reset/ serial cable. Once you have the cable you can use it to connect to each controller and change the management IP, & iSCSI IP addresses.
Please let us know if you have any other questions.
HgAnh
1 Message
0
November 29th, 2019 19:00
Hello,
I have a Dell PowerVault MD3800f. The management port maybe was changed ip address that I do not know. How can I setup this ip address for the management port because I can not find a console port on a MD3800f.
Thank you
H.Anh
Email:
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
December 2nd, 2019 15:00
Hello H.Anh,
You will need to the serial cable to change the ip address of the management ports on your MD3800f. Here is the Dell part# VPNP6 for the micro SD to DB9. If you do a search you can find many places that sell the cable. Here is the link to the users guide and if you look on page 12 it shows you where to connect the cable on the controller. https://topics-cdn.dell.com/pdf/powervault-md3800f_owners-manual2_en-us.pdf
Here are the steps to connect to the serial connection on the controllers so that you can change the IP address.
1) Display IP Configuration
2) Change IP Configuration
3) Reset Storage Array (SYMbol) Password
Please let us know if you have any other questions.