Unsolved
12 Posts
0
1210
Mimic Powerconnect 5548 config to N2048
Hi all, I am trying to mimic an old Powerconnect 5548 stacking config to an N2048. It has been a CLI battle with the different code bases and commands but I am close with a few outstanding issues: Server VLAN - 192.168.0.254 - PC VLAN 192.168.3.254 - DHCP server is a Windows server on 192.168.0.1 with 192.168.0.0 and 192.168.3.0 scopes. * currently anything plugged into a VLAN3 port does not get DHCP nor can it reach the VLAN1 subnet so there appears to be something I am missing with inter-VLAN connectivity/routing. VLAN1 ports get DHCP. * testing switchover, the internet (leased line router) is patched to gigabitethernet1/0/48 which is just a P2P VLAN2 port but no internet is present on any port. I believe I have added the required static route of the router. Any help would be greatly appreciated. I have each of the config files. david
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 24th, 2018 09:00
Hi,
DHCP relay should help. Page 336 https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/networking-n2000-series_user%27s-guide11_en-us.pdf
Coops7
12 Posts
0
October 25th, 2018 02:00
Thanks Josh - is there a way I can upload the configs for you to possibly glance over?
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 25th, 2018 09:00
The easiest way is to upload it somewhere and post the link.
Coops7
12 Posts
0
October 25th, 2018 10:00
Thanks Josh, here goes...2 x configs zipped
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 26th, 2018 09:00
Are you still having issues with dhcp? Nothing stood out as wrong in the config.
Coops7
12 Posts
0
October 26th, 2018 11:00
Thanks for looking Josh. I am next at the customer site on Monday.
I have applied the changes via CLI on a machine I have in the Server Room but to fully test I need to be physically there.
Much appreciated!