This post is more than 5 years old
3 Posts
0
1607
INTER VSAN ROUTING
I have two different storages running on a two different VSAN. However, I need to provide the devices from both the storages to the same ESX server. I got to know through INTER VSAN ROUTING it can be possible. Please suggest how do we implment and configure IVR in the running CISCO enviornment.
emc_troy
142 Posts
0
August 29th, 2009 19:00
------------------------------------------------------------------------ Configure IVR
cisdir-t-i7(config)# ivr enable
ENTERPRISE_PKG license not installed. Inter-VSAN Routing feature will be shutdown after grace period of approximately 119 day(s).
cisdir-t-i7(config)# ivr distribute
------------------------------------------------------------------------ Configure IVR Topology DB
cisdir-t-i7(config)# ivr vsan-topology database
cisdir-t-i7(config-ivr-topology-db)# autonomous-fabric-id 1 switch-wwn XX:00:00:0d:XX:3c:XX:XX vsan-ranges 2,3
fabric is now locked for configuration. Please 'commit' configuration when done.
cisdir-t-i7(config-ivr-topology-db)# ivr commit
cisdir-t-i7(config)# ivr vsan-topology activate
fabric is now locked for configuration. Please 'commit' configuration when done.
cisdir-t-i7(config)# ivr commit
------------------------------------------------------------------------ Configure IVR Zones
cisdir-t-i7(config)# ivr zone name ivr-paru-sd1_port1-cx380-i5
fabric is now locked for configuration. Please 'commit' configuration when done.
cisdir-t-i7(config-ivr-zone)# member device-alias paru-sd1_port1 vsan 3
cisdir-t-i7(config-ivr-zone)# member device-alias cx380-i5-spa-p0 vsan 2
cisdir-t-i7(config-ivr-zone)# member device-alias cx380-i5-spa-p1 vsan 2
cisdir-t-i7(config-ivr-zone)# member device-alias cx380-i5-spb-p2 vsan 2
cisdir-t-i7(config-ivr-zone)# member device-alias cx380-i5-spb-p3 vsan 2
cisdir-t-i7(config-ivr-zone)# exit
------------------------------------------------------------------------ Configure IVR ZoneSet
cisdir-t-i7(config)# ivr zoneset name zs-ivr2
cisdir-t-i7(config-ivr-zoneset)# member ivr-paru-sd1_port1-cx380-i5
cisdir-t-i7(config-ivr-zoneset)# exit
cisdir-t-i7(config)# ivr zoneset activate name zs-ivr2
fabric is now locked for configuration. Please 'commit' configuration when done.
cisdir-t-i7(config)# ivr commit
------------------------------------------------------------------------ Display IVR
cisdir-t-i7(config)# do show ivr
Inter-VSAN Routing is enabled
Inter-VSAN enabled switches
---------------------------
AFID VSAN DOMAIN CAPABILITY SWITCH WWN
-------------------------------------------------------------------
1 2 0xa8(168) 00000007 XX:00:00:0d:ec:3c:af:XX *
1 3 0x27( 39) 00000007 XX:00:00:0d:ec:3c:af:XX *
Total: 2 IVR-enabled VSAN-Domain pairs
Inter-VSAN topology status
--------------------------
Current Status: Inter-VSAN topology is ACTIVE, USER-CONFIG Mode
Last activation time: Tue Feb 26 19:57:10 2008
Inter-VSAN zoneset status
-------------------------
name :
state : activation failure (no vsans to activate)
last activate time :
Fabric distribution status
-----------------------
fabric distribution enabled
Last Action Time Stamp : None
Last Action : Commit
Last Action Result : Success
Last Action Failure Reason : none
Inter-VSAN NAT mode status
--------------------------
FCID-NAT is disabled
License status
-----------------
IVR is running based on the following license(s)
ENTERPRISE_PKG
Sharing of tcam space across xE ports disabled
------------------------------------------------------------------------ Display Active IVR ZoneSet
cisdir-t-i7(config)# do show ivr zoneset active
zoneset name zs-ivr2
zone name ivr-paru-sd1_port1-cx380-i5
* pwwn XX:00:00:00:c9:57:XX:XX vsan 3 autonomous-fabric-id 1 [paru-sd1_port1]
* pwwn XX:06:01:60:39:a0:XX:XX vsan 2 autonomous-fabric-id 1 [cx380-i5-spa-p0]
* pwwn XX:06:01:61:39:a0:XX:XX vsan 2 autonomous-fabric-id 1 [cx380-i5-spa-p1]
* pwwn XX:06:01:6a:39:a0:XX:XX vsan 2 autonomous-fabric-id 1 [cx380-i5-spb-p2]
* pwwn XX:06:01:6b:39:a0:XX:XX vsan 2 autonomous-fabric-id 1 [cx380-i5-spb-p3]
cisdir-t-i7(config)# exit
------------------------------------------------------------------------ Save the Configuration
cisdir-t-i7# copy running-config startup-config
[########################################] 100%
Niksss-l8QOR
3 Posts
0
September 21st, 2009 07:00
RashidMahamood
18 Posts
0
January 28th, 2015 06:00
Dear Team,
I am going to configure the IVR. My Environment is mentioned below. So please let me know how to create the IVR between primary and DR site by using below inputs.
Production Site Fabric 1
Production Site Fabric 2
DR site Fabric 1
DR Site FABRIC 2
All servers and hosts are connected to MDS 9710 series switch in both sites. MDS 9222i switch is used to create only for FCIP and IVR. So please let me know where i have to enable the IVR and what will be the IVR VSAN topology.
I wanted to configure IVR without NAT and IVR without auto config.