Unsolved
This post is more than 5 years old
10 Posts
0
1511
new disk pool not seen in celerra
Hello!
I created new disk pool in Navisphere express and create virtual disk on it (right now in 50% initialisation state)
But i not see this virtual disk in Celerra manager and cant create file system on it and share it...
Manual of Celerra said if u create disk in Navisphere just rescan in Storage > System menu, but it's not give any effects
I tried to connect this virtual disk to only one exited server in Navisphere (Celerra_emcnas_i0) like other virtual disk, but it not help me to see v.disk in Celerra manager. How to add it to Celerra??????
Rainer_EMC
8.6K Posts
0
March 17th, 2010 10:00
which RAID type and number of disks did you create ?
is it one supported by the NX4 ?
take a look at "server_log server_2" while you are running the rescan for errors
Rainer
P.S.: I would really have been easier to use the Storage Provisioning Wizard
Georgy3
10 Posts
0
March 17th, 2010 10:00
provision wizard fails with error raigp:: list_disk_technology, and emc support help me to create disk pool via navisphere it's raid5 with 16 disk divided between aray and processor enclosure. Where i can find server_log?
Georgy3
10 Posts
0
March 17th, 2010 11:00
Ok, server_log server_2 empty when i scan storage
But i read another topics, and found that i need set LUN, how to do it, without Navisphere Server(i not use FC connections)?
Rainer_EMC
8.6K Posts
0
March 17th, 2010 12:00
I think you mean the HLU (host id) - you cant do that with NaviExpress - but thats fine - the Celerra will do that for you once it has recognized the LUN
Rainer_EMC
8.6K Posts
0
March 17th, 2010 12:00
what do you mean with 16 disks - like a 15+1R5 ?
NX4 only supports 2+1R5 to 5+1R5 - I would suggest to create multiple pools with like 2x 4+1R5 and 1x 5+1R5 for example
you might have to wait till the LUNs are initialized - I dont remember if the AX4 has quick bind (i.e. if the LUNs are already accessible while initializing)
Rainer
Rainer_EMC
8.6K Posts
0
March 17th, 2010 12:00
yes that seems to be an open problem - please ask support to add your service request to Primus emc218799
Georgy3
10 Posts
0
March 17th, 2010 12:00
There is no option in Navisphere express to do 15+1R5, just 16 disks to raid5 and one i marked as hot spare in another line of menu, now i removed disk pool on 16 disks and created 3 disk pools and launched to create 3 virtual disks, is it possible connect this three virtual disks in one storage space?
And one more trouble, when i first time tried to create disks pool, it was give me error when i add all disks to it in one time, and just for test added one disk to pool0 via expand, now i get such warnings:
Rainer_EMC
8.6K Posts
1
March 17th, 2010 13:00
I havent used NaviExpress myself but I think in its lingo a pool is a raidgroup and a virtual disk is a LUN
for Celerra use - dont expand raidgroups or LUNs
sure - you can add multiple raidgroups to the Celerra - the Celerra will sort them into a Celerra pool (different than Clariion pool) and the Celerra volume manager (AVM) will automatically combine them as needed.