Unsolved
This post is more than 5 years old
4 Posts
0
767
How can we change the management IP and domain of a CX-300
Hi,
We have a CX 300, and CX4-240 both them are moved from one location to another location. We are trying to change the IP addresses for both and also tryig ot move them to another domain. Can some one point me to a document which guides me to do all this.
Jim_A1
59 Posts
0
September 16th, 2010 18:00
Vamsi,
you need to do the following -
File > Setup Domain > Configure Domain
Then remove the all the arrays from the domain.
When the arrays are out and the domian is destroyed...you can change the IP addrs of the arrays.
When the ip addrs are set, then recreate the domain, and add the arrays back.
Roops1
18 Posts
0
September 16th, 2010 19:00
Hi
Below mentioned is the procedure to change the IP address. But keep one thing in mind that below steps will cause SP reboot.
Change the IP address on SP A:
http:// /setup/
The SP will reboot (may take up to five minutes).
http:// /setup/
Change the IP address of SP B:
http:// /setup/
The SP will reboot (may take up to five minutes).
http:// /setup/
Update SP A with the new Peer IP address:
http:// /setup/
Domain Configuration :-
Please mark it answered if this answer your query.