This post is more than 5 years old
7 Posts
0
7362
Symmetrix OID MIB Values - SNMP
I am looking to monitor my Symmetrix arrays using the Solutions Enabler storevntd. I am successfully sending traps to our Network Management System, currently NetCool, but we are not able to set the severity properly. I'm looking for the OID Tree that is being used so I can validate which OID is for severity and what the severity corresponds to. Below is an example of what NetCool is receiving from the storevntd.
Enterprise: 1.3.6.1.4.1.1139.3
Object:1.3.6.1.3.94.1.11.1.3.80.6.4.130.222.184.230.128.0.0.0.0.0.0.0.0.1 Value:1
Object:1.3.6.1.3.94.1.11.1.7.80.6.4.130.222.184.230.128.0.0.0.0.0.0.0.0.1 Value:2
Object:1.3.6.1.3.94.1.11.1.8.80.6.4.130.222.184.230.128.0.0.0.0.0.0.0.0.1 Value:0.0
Object:1.3.6.1.3.94.1.11.1.9.80.6.4.130.222.184.230.128.0.0.0.0.0.0.0.0.1 Value:Symmetrix 000192603034 UNKNOWN 15 : Symmetrix External Lock has been acquired.
Object:1.3.6.1.3.94.1.11.1.6.80.6.4.130.222.184.230.128.0.0.0.0.0.0.0.0.1 Value:8
Object:1.3.6.1.3.94.1.6.1.20.80.6.4.130.222.184.230.128.0.0.0.0.0.0.0.0 Value:000192603034
Object:1.3.6.1.3.94.1.6.1.3.80.6.4.130.222.184.230.128.0.0.0.0.0.0.0.0 Value:11
Object:1.3.6.1.4.1.1139.3.8888.1.0 Value:2
Object:1.3.6.1.4.1.1139.3.8888.2.0 Value:1209
Object:1.3.6.1.4.1.1139.3.8888.3.0 Value:1038
Object:1.3.6.1.4.1.1139.3.8888.4.0 Value:15
Anyone using SNMP HELP!!!!!
PedalHarder
465 Posts
0
November 16th, 2010 16:00
Symmetrix uses the FCMGMT MIB. MIB stands for Management Information Base. OID (the entries in the MIB) are Object IDentifiers.
In your example the severity is INFO.
You can work it out in the following way:
The overview of how the MIB is structured can be found here:
http://www.oidview.com/mibs/0/FCMGMT-MIB.html
From here you can see that Object:1.3.6.1.3.94.1.11.1.6 is known as "connUnitEventSeverity".
Download the .zip file from the above address and you find:
FcEventSeverity ::= INTEGER {
unknown (1),
emergency (2),
alert (3),
critical (4),
error (5),
warning (6),
notify (7),
info (8),
debug (9),
mark (10) -- All messages logged
So...
Object:1.3.6.1.3.94.1.11.1.6.80.6.4.130.222.184.230.128.0.0.0.0.0.0.0.0.1 Value:8
translates to INFO in the above table.
paone
1 Message
0
November 1st, 2010 12:00
Can we get any help on MIB for Symmetrix ? I would appreciate if any one can provide sample MIB file for Symmetrix VMAX ? thanks !!
Booyah2
184 Posts
0
November 16th, 2010 09:00
Not sure if I can help or not, but I dont mind trying to...
So, what exactly do the acronyms OID and MIB stand for?
Maybe I can do some searching for you.
McNally
7 Posts
0
November 18th, 2010 10:00
Thanks for the assistance. That is what I had thought, but I'm no expert when it comes to SNMP and I just wasn't sure. I also found this web site to provide a little more info and let you browse the MIB without having to download the zip file. http://ipmsupport.solarwinds.com/mibs_byoidtree.aspx?oid=
Chris
KhawajaSohaib
2 Posts
0
April 15th, 2013 15:00
Hi McNally ,
Need your help , Kindly put some light on OIDs values where can I find these , I mean I have the mib file but our Netcool guy dont know how to configure so Netcool matche the trap values