CLARiiON
Posts
This post is more than 5 years old
Solved!
Go to Solution5 Posts
0
1962
November 25th, 2011 08:00
DMX Drives in a Clariion?
Hey guys,
Does the DMX drives- namely the
100-880-817 work in a CX3-20, latest FLARE code?
Thanks!
Dan
Responses(6)
No Events found!
Vipin VK
812 Posts
0
November 25th, 2011 09:00
Hi Dan,
Refer to EMC Parts Compatibility Database web site for checking compatibility of different parts with different hardware models and code levels. This site gives link to ALL_VNX_CLARiiON_Celerra_Disk_OE_Matrices which lists drives compatibility with different Clariion/ VNX models and FLARE versions.
Vipin V.K
Mneumonik1
5 Posts
0
November 26th, 2011 07:00
Thanks! Turns out the seller haf the wrong part number, it was really 005048633, which is all good! Whooo 10x brand new of those for $200!
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 26th, 2011 07:00
is your Clariion under active maintenance contract with EMC ?
Mneumonik1
5 Posts
1
November 26th, 2011 11:00
Oh, i wish. This is well out of maintenance, otherwise i'd never be putting drives outside of EMC's channel.
TheJudge1
13 Posts
0
April 14th, 2016 02:00
Hello,
Although this topic is old, I have the same question.
Is is possible to reformat the DMX disks in order to be supported by the Clariion storage system?
As far as I understood the DMX-3/DMX-4 disks have 512bytes/sector disk geometry while the Clariion ones have 520bytes/sector. If the disk geometry for a DMX disk is changed to 520byes/sector using a Linux/UNIX machine, are there any chances that the disk to be recognized by Clariion?
Regards,
Raul
kelleg
4.5K Posts
0
April 18th, 2016 10:00
Probably not - there is more to formatting the disk to 520 bytes per sector, it would also need the specific VNX/CLARiiON firmware - check the OE Flare Matrix to be sure.
glen