Unsolved
This post is more than 5 years old
29 Posts
0
1472
Throttle Centera one way replication
I am taking our secondary Centera and changing the protection properties to parity from Mirrored to gain some available space for data due to physical area limitations in our DR DC. After the protection has changed we need to basically migrate or rereplicate the dat back over to the secondary unit. There is around 40TB and we have a 1GB link to that area. Is it possible to throttle from the Centera so we do not saturate the link?
Thanks
Mark
Phukon
337 Posts
0
April 10th, 2012 02:00
How many nodes are assigned to the access role?
Regards,
Bashanta Phukon
Markjc2
29 Posts
0
April 10th, 2012 08:00
There are 2 nodes assigned the access role
Mark Conrad
System Engineer
Samaritan Health Services
541-768-4329
541-740-2475
Satish_Kutty
216 Posts
0
April 11th, 2012 05:00
Hi Mark,
I believe that it is possible, please refer the Primus solution ID "emc144881" as per the Primus solution the replication speed can be adjusted by decreasing or increasing the Clip exporters quantity in each access nodes.
Regards
Satish.N.Kutty
holgerjakob_c0722c
337 Posts
0
June 24th, 2012 23:00
Hi Mark
In this case you'll probably prefer a factory init and then setting up your system with CPP. Throtteling the restore process for the existing data is not as easy as for replication with the clip exporters.
You'll need to redistribute new .pea files after the factory init at the system identifier will change.
Can't you implement QOS in the network between the IP addresses of the Centera's?
Other than that I would think that setting up the system right next to your source for the restore process and transporting it back/forth should also be looked at.
Holger