Unsolved
This post is more than 5 years old
41 Posts
0
568
Netware client RPC error
I have a Netware backup client running v6.5 SP8 and Networker client 7.21 and the savegroup completion message is showing this message, but the backup completes.
SAVE.NLM: RPC error: RPC send operation failed. A network connection could not be established with the host.
should I be worried or not? or do I need to fix something?
Backup server is Red Hat Linux 5.8 and Netwoker server v7.6.3.3
thanks in advance
pn1lDbv3G612259
105 Posts
0
May 10th, 2012 09:00
Hi,
The issue can be due to the name resolution.
Please refer this article and follow the steps accordingly.
http://solutions.emc.com/EMCSolutionView.asp?id=esg90144&usertype=C
Thanks
ShivaKiran
coganb
736 Posts
0
May 11th, 2012 00:00
Hi,
You should have a look in the media database to see if the backup was successful and everything is as you expect:
mminfo -q client=[client_name_here] -r ssid,name,level,savetime,ssflags,sumflags,totalsize
If you are still unsure, you can test by doing a 'dummy recover' to see what's in the saveset:
- recover -s [nw_server_name_here] -n -S [ssid_here] > dummy_recover 2>&1
- this will not recover any data but will output to the file what would have been recovered by a recover of the entire saveset
-Bobby