Unsolved
This post is more than 5 years old
2 Posts
0
4084
EMC SMI-S Provider + HP System Insight Manager
Hi,
EMC SMI-S Provider is installed successfully,
TestSmiProvider.exe connects to it provides added storage
Executes requests to local and remote hosts:
"(localhost:5989) ? dv
++++ Display version information ++++
CIM ObjectManager Name: EMC:192.168.0.168
CIMOM Version: EMC CIM Server Version 2.6.3.0.0.38
SMI-S spec version: 1.4.0
SMI-S Provider version: V4.2.0.0
SMI-S Provider Location: Proxy
SMI-S Provider Server:
Windows_NT LTEST 6.1.7601 Service Pack 1 x86_64 (64bit Libraries)
Solutions Enabler version: V7.2-1108 0.0
Firmware version information:
(Local) CLARiiON Array CKM00112000081 (Rack Mounted VNX5300) : 5.31.0.5.502
Retrieve and Display data - 1 Iteration(s) In 0.093590 Seconds
Please press enter key to continue..."
"(192.168.0.168:5989) ? ens
++++ Testing Namespace operations ++++
Namespace 0: interop
Namespace 1: root/emc/host
Namespace 2: root/emc
Namespace 3: root/emc/ecom
Enumerate 4 Namespaces; repeat count 1; return data in 0.004883 seconds
Retrieve and Display data - 1 Iteration(s) In 0.059573 Seconds
Please press enter key to continue..."
If you go to the web interface by following address:
https://localhost:5989/ECOMSetup
message appear:
"The network configuration could not be obtained:
The Active Secure Port could not be retrieved from the Network Port settings."
Errors in identification in the HP SIM:
Minor: This system does not have any SMI-S CIMOMs installed. No storage
systems will be found on this system.
Minor: The Central Management System (CMS) cannot communicate with the
CIMOM locally installed on the managed system using the WBEM
protocol, Identification will try to identify Windows systems using
the WMI Mapper as proxy; for Linux and HP-UX systems, check
credentials by going to Options->Security->Credentials->System
Credentials. For Linux systems also check if the HP WBEM provider
is installed.
In the logs of EMC CIM Server authentication is successful, but there are some errors:
"NAVSSLSocket: SSL read error: Error reading data. Error details: A system call error."
"ECOM WebServer: Net Exception occured while doing SSL handshake. Error accepting connection. Error details: An error occurred as a result of an SSL protocol failure."
Regards
lodo
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
October 6th, 2011 17:00
This issue was raised through EMC support channels and is now being investigated. The EMC provider is setup properly and is functioning as shown by the dv option of testsmiprovider. Once the issue is resolved I'll do my best to update this note with the resolution.
lodo1
2 Posts
0
October 19th, 2011 00:00
Hi Richard,
when about to expect a resolve issue?
wanaka
1 Rookie
1 Rookie
•
116 Posts
0
September 18th, 2015 20:00
Hi
I am having the exact problem. How did you manage to solve the issue?