Skip to main content
Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

cattaf

11 Posts

12585

June 5th, 2013 02:00

ODM interoperability matrix

Hi,

where i can find an interoperability matrix (with powerpath, AIX and VIOS) to choose best ODM package for my host configuration?

Regards

Fabrizio

Avinash V

91 Posts

June 5th, 2013 05:00

Host connectivity guide -| https://elabnavigator.emc.com/emcpubs/elab/config_guide/AIX.pdf

You need to look at the minimum required ODM version in the above doc --

NOTE: Only following condition apply -
ftp://ftp.emc.com/pub/elab/aix/ODM_DEFINITIONS/README.1st

  If you are running AIX 5.1, please use the EMC.AIX.5.1.0.4.tar.Z package.
  
  If you are running AIX 5.2, 5.3, 6.1 please use minimum EMC.AIX.5.3.0.3.tar.Z.

  If you are running AIX 5.3, 6.1 with VNX please use minimum EMC.AIX.5.3.0.5.tar.Z.

  If you are running AIX 7.1 please use minimum EMC.AIX.6.0.0.0.tar.

You need to ensure that you installed the correct ODM fileset required for Powerpath or MPIO.

dynamox

1 Rookie

 • 

20.4K Posts

June 5th, 2013 04:00

cattaf

11 Posts

June 5th, 2013 04:00

Thanks, for your reply but i know this.

I didn't specified in my previous post that i don't know what i have to look for to find out this information on "EMC Support Statement".

Zikas

278 Posts

June 5th, 2013 04:00

Hi Cattaf,

if you execute an EMCGrab/Report on a AIX host you will see an indication which ODM files a remissing, even for Symmetrix or VNX/Clariion.

Zikas

278 Posts

June 5th, 2013 05:00

Hi Cattaf,

in AIX connectivity guide document you can have this info if i remember well.


cattaf

11 Posts

June 5th, 2013 05:00

Many many thanks to all!

cattaf

11 Posts

June 5th, 2013 05:00

Many thanks.

Where did you find that this version is compatible with all my "prerequisites"?

cattaf

11 Posts

June 5th, 2013 05:00

Hi,

on EMCGrab i have this:

"The symmetrix ODM revision 5.3.0.4 is not at the minimum EMC recommended level AIX Version 6.1 with the 6100-07 TL, or later."

I want to find out what is the latest ODM that i can install with my AIX, 6.1 VIO 2.2.1.3 and powerpath 5.5.

Avinash V

91 Posts

June 5th, 2013 05:00

View More

View All

No Events found!

Top