Unsolved
This post is more than 5 years old
32 Posts
0
2599
Open Replicator hot push copy from VMAX to XIO
Hello,
I have a scenario where a copy of data needs to be seeded on an XIO to mimic current Oracle production on a VMAX.
Besides RMAN Backup/Restore, Open Replicator (hot push) is being considered.
When considering OR, issue is the same VMAX control devices that are needed to create the OR sessions are currently enabled for RecoverPoint and replicating with RecoverPoint CRR. I believe we cannot create OR sessions on same devices used by RecoverPoint.
Trying to determine if any possibilities or ideas to still be able to leverage OR for the data seeding from VMAX to XIO.
Thanks for any suggestions!
echolaughmk
522 Posts
0
October 13th, 2015 05:00
Yeah - I believe that will be a restriction with OR since you are involved in RP with the VMAX splitter. You could disable the CG in RP and then use OR for your initial seed, although you will have no protection at that time in RP when you do it
Other alternatives I could think of given you are EMC storage one both ends:
1. PowerPath Migration Enabler (PPME) if Powerpath is in use?
2. LVM/Host copy at the host level - LVM is online for UNIX solutions. If this is Windows you would have to look at something like Open Migrator, which has outages associated with it.
3. Backup/restore like you mention
4. Clone/Snap your current VMAX LUNs and use those as your PiT OR push source devices as they won't be involved with RP.
There might be some host work if this is the same or a different host depending on the LVM usage (export vgs, import, chvg, etc) but it would allow you to get a copy.
HTH,
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
October 13th, 2015 11:00
Snap (VDEV) cannot be used as source for OR hot push (tried it
) , have not tried with the snapvx.
AshJo
60 Posts
0
July 16th, 2016 14:00
Can anyone help me set up OR push, both hot and cold options from VMAX to XIO. Any document wuld help
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
July 16th, 2016 20:00
what specifically are you having problems with ? Have you looked at Solutions enabler manual ?
Kumar_A
727 Posts
0
July 17th, 2016 19:00
There are documents that have been published to help with this Push activity from VMAX to XtremIO. You should reach out to your EMC Account team who should have access to this document.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
July 17th, 2016 20:00
don't need any special documents, download Solutions Enabler Array Management CLI document, chapter 23.
rrukhaiyarIND
10 Posts
0
July 19th, 2016 03:00
Use this PDF as a reference,
https://india.emc.com/collateral/software/technical-documentation/h5765-data-migration-open-replicator-symm-ppme-techbook.pdf
dunnel1
5 Posts
1
October 24th, 2016 15:00
Ashwini, did you find the necessary documentation to help with your OR Migration? If not the following document should be helpful: https://support.emc.com/docu58990_SAN_Copy_and_Open_Replicator_Migration_from_EMC_Storage_to_EMC_XtremIO.pdf?language=en…
AshJo
60 Posts
0
October 26th, 2016 07:00
Thank you Liamy and everyone who tried to help me. Was able to migrate sucessfully to XIO