Unsolved
This post is more than 5 years old
43 Posts
1
1064
Any experience monitoring VNXe using NetIQ out there?
All
I am trying to figure out how to utilize NetIQ to monitor VNXe 1600 and 3150.
Does anybody have any tips how to make this work?
Any help appreciated
/LarsB
ddowden
1 Message
0
September 29th, 2016 12:00
You could monitor these devices with NetIQ AppManager and the Hardware Module using SMI-S provider and if SNMP is enabled on the devices then you could also use the NetIQ AppManager SNMP Toolkit.
NetIQ Documentation: AppManager for Hardware Management Guide - AppManager for Hardware Management Guide - July 14 2013
NetIQ Documentation: NetIQ AppManager SNMP Toolkit Management Guide - NetIQ AppManager SNMP Toolkit Management Guide
Please let me know if this answers your questions.
Rainer_EMC
8.6K Posts
1
September 30th, 2016 02:00
In terms of SMI-S where is what the VNXe1600 supports:
VNXe SMI-S programmers guide for the 1600/3200 is available from support.emc.com
The 3150 is a different code base - I believe it only supports the Microsoft SMI-S for file
Rainer_EMC
8.6K Posts
0
September 30th, 2016 02:00
SNMP traps for alerting are supported - no polling (snmp get) or active Management (snmp set)