Unsolved
This post is more than 5 years old
1 Message
0
1300
JCASScript connect to Centera
Hi - I have tried to connect to centera through Jcasscript , but its says authentication error. I was able to login with the same user id and password on Centera Viewer.
CASScript>PO Enter IP address?name=<>,secret=<>
Attempting to connect to: ?name= ,secret=
SDK Error Occurred:
Error Number: -10153
System Error: 0
Error: FP_AUTHENTICATION_FAILED_ERR
Error Class: Server Error
Trace: LoadLibrary(PAI_module.dll)
with CENTERA_CUSTOM_PAI_MODULE="NULL"
t=)<_FPPool_Open(*.*.*.6?name=***,secret=**)
*.*.6?name=,secret=)
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 25th, 2016 09:00
check your pea file with centera verify, if you are replicating you must have a merged pea file
mfh2
208 Posts
0
July 27th, 2016 07:00
It sounds like you are trying to use an admin login to connect to the data pools on Centera? That doesn't work; admin credentials are completely separate from pool access credentials.
Try connecting to the default pool via JCAS with a simple 'po '. If that works, but does not give you access to the data you need (due to virtual pool restrictions) then check out the 'create profile' command section of the Centera administrator's guide.
Good Luck!
Mike Horgan