Unsolved
This post is more than 5 years old
17 Posts
0
2849
Please school me on Recoverpoint and Oracle lun to lun
Hello I am working on setting up a recoverpoint LUN to LUN replication for oracle and I am having a hard time with getting oracle to work correctly.
http://gifrific.com/wp-content/uploads/2012/07/Neil-Patrick-Harris-Gun-to-Head.gif" />
-In read/write mode I can get oracle up and working correctly etc
Question: in read only mode should I still be able to sqlplus into oracle?
- multipaths are named the same
If anyone has any recommend pdfs or whitepapers etc to read it would be very much appreciated!
http://harlequinblog.com/wp-content/uploads/2016/08/matilda_read.gif" />
forshr
1.1K Posts
1
January 8th, 2017 12:00
Hi quinc,
Are you using image access (Test a Copy) or image access (Test a Copy) in conjunction with a Failover as part of your testing?
Both will allow read/write access to the replica volumes and these are the supported methods for accessing the replica volumes and the database running on them.
Regards,
Rich
Quinc
17 Posts
0
January 9th, 2017 14:00
I have only heard it called lun to lun replication. During the Oracle upgrade and reinstall I had to ask that it was set to read/write vs read only mode. In read only mode Oracle cannot see the luns/multipath.
Is there anything specific that needs to be done with recoverpoint and Oracle 12c RAC ASM lunt to lun replication?