Unsolved
This post is more than 5 years old
6 Posts
0
816
Create report for luns alloacted to server and those in Cgs
Hi ,greetings !!
We hv sun server in cluster in one site and at site 2 , we have standalone sun machine.Luns are from Vnx ,one at each of these site and being replicated as CGS in RecoverPoint.
From RP you can export report of rsets in CG ,but once i have got a neat lun Wwn report which has following header
Clu.Serv1 Clu.Serv2 Dr.Srv1 LunId Rset CG.Name
How can i create a similar report spanning storage lun Wwn from both side ,lun id , Rset and cg name
I know you can export from Rset tab for a Cg ,but that won't list storage lun wwns
Thanks ,rt.
forshr
1.1K Posts
1
January 14th, 2017 15:00
Take a look at the output from save_settings. Export it use the plink command:
plink -ssh x.x.x.x (where x.x.x.x. is the Cluster IP address) -l admin -pw admin save_settings > save_settings.txt
Regards,
Rich
DeafFrog
6 Posts
0
January 15th, 2017 05:00
Thankyou Rich for the reply , it was helpful.
Smithina
1 Message
0
September 12th, 2018 22:00
Hi ,greetings !!
We hv sun server in cluster in one site and at site 2 , we have standalone sun machine.Luns are from Vnx ,one at each of these site and being replicated as CGS in RecoverPoint.
From RP you can export report of rsets in CG ,but once i have got a neat lun Wwn report which has following header
Clu.Serv1 Clu.Serv2 Dr.Srv1 LunId Rset CG.Name
How can i create a similar report spanning storage lun Wwn from both side ,lun id , Rset and cg name
I know you can export from Rset tab for a Cg ,but that won't list storage lun wwns
Thanks ,rt.
Hi did you get any proper solution, I am getting the same issue.