Unsolved
This post is more than 5 years old
2 Posts
0
3214
VNX5100 Upgrade Firmware Error
Hi all
i've a problem during VNX5100 firmware upgrade
I've download (maybe) the latest correct version of firmware FILE_OE-7.1.79.8.pbu; when i start Unisphere Service Manager i receive all the info about VNX....
Ok.....I give to VNX the .pbu file....the VNX check....but when do the query for start the installation i receive this error
"List of packages not installable because they are not supported on this storage system model" on two LUN's
where is the problem?!
PLease, help me
Peter_EMC
674 Posts
0
February 4th, 2016 23:00
VNX5100 does not support File, it is a Block only system. Your mentioned firmware version is for a unified system.
The firmware you need, is f.e.:
CX5-Bundle-05.32.000.5.219.pbu
qeialto
2 Posts
0
February 5th, 2016 00:00
Sorry but i don't have access to file
Rainer_EMC
8.6K Posts
0
February 5th, 2016 06:00
You need to go through support.emc.com
Select support by product
Select VNX5100
Select Downloads
Sort by date
It should be shown in the list there
IF you still cannot see it there and don’t have permission to download then please contact support (not forum) to check the entitlements for your support login
1 Attachment
image001.png
kelleg
4.5K Posts
0
February 9th, 2016 07:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen