This post is more than 5 years old
2 Posts
0
3831
Does HBA /Cisco chassis and FI compatible with target brocade FOS 8.0.2d
I have Brocade Switches 6505B running with 7.2.1d FOS Version. So I’m going to upgrade to target code 8.0.2d using below sequence upgrade path
Steps: 7.2.1d -> 7.3.2b -> 7.4.1d -> 8.0.2d
Before upgrading Target code FOS 8.0.2d,I was checking compatibility of HBA driver versions which should supported by target code FOS 8.0.2d,but I not finding any such compatibility details in the release notes (https://download.emc.com/downloads/DL87413_Fabric_OS_8.0.2d.zip?source=OLS)
We have servers/host connected to switch running with below HBA versions So please can someone guide/correct me what is minimum/recommended firmware and driver version for below HBA supported by target code v8.0.2d
QLE2562 FW:v5.09.00 DVR:v1.1.7.0"
HPAJ764A FW:v8.01.02 DVR:v1.1.55.0"
fnic (Running with different firmware and driver versions such as v1.6.0.17a, v1.6.0.28,etc)
And also does below Cisco chassis and FI is compatible with target code ? as We have few of Cisco Blades which are part of UCSM (3.1(3c) connected to FC Switch via Fabric Interconnects.
IOM: Cisco UCS 2208XP(IOM)
Fabric Interconnect: Cisco UCS 6248UP
Thanks in advance
healyj
141 Posts
0
May 9th, 2018 03:00
Hello,
You should have access to E-Lab Navigator from the following link:
https://elabnavigator.emc.com/eln/elnhome
Thanks and rgds,
Jim.