Unsolved
9 Posts
0
581
Recover MD3000 RAID 5 failure
Hi,
We recently had a problem with a Dell MD3000 where we have 12 600GB disks on a RAID 5.
First, we observed an error on slot 5, and before having the time to replace it, slot 8 failed also, generating an error on our systems due to the inaccessible storage. Now, we don't have access to the vDisk and we need to know the following:
1- Is it possible to recover the data inside the mentioned RAID5?
2- Will it be enough replacing the disks, or do we need to follow a certain procedure?
Thank you. Kind Regards,
Javier
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
January 29th, 2019 10:00
Hello Javier,
With having 2 drives fail in a raid 5 you might be able to recover the data with the use of a data recovery company. Were either drive that failed showing as predicted failure? Did you have a hotspare configured or no? if you replace a drive it most likely won’t start a rebuild due to 2 drives are down. If you need the data & don’t have a backup then I wouldn’t replace any drives, & I would contact a recovery company to assist in recovering the data. If you have a vaild backup, then I would replace the drives & restore data to your virtual disk.
Please let us know if you have any other questions.