Unsolved
49 Posts
0
2828
RP - Volumes not visible in GUI but seen in RP CLI
Hello,
This is a VPLEX/RP environement on SRC and TGT
VPLEX volumes mapped to RP on source side are seen through RP CLI but not visible in GUI when trying to create the RP CG.
I have verified that no filters are used.
Anyone encountered this before? Is there any GUI service that need to be restarted?
Thanks
Idan
675 Posts
0
March 4th, 2019 23:00
Hi there,
This can be a size-related matter if we're talking about replica volumes. If not, then I would try to restart the site control RPA (SSH to the cluster management IP using user admin (or boxmgmt in earlier versions) and navigate to [5] Shutdown / Reboot operations), just as a workaround.
If that doesn't help, I would recommend raising an SR w/ support.
Hope that helps,
Idan Kentor
Product Engineer - RecoverPoint and RecoverPoint for VMs
@IdanKentor