Unsolved
3 Posts
0
972
MLAG peer link portchannel inactive link
Hi everyone,
I have configuered MLAG between my two Dell N3048 switches and it's up and running.
The issue is, i'm using both Ten gigabitethernet ports for the port channel that establishes the peer link, but it's only one interface that's active in port-channel. Is there any limitations on having more than interface in the peer link channel?
DH-SW01(config)#show interfaces port-channel 10
Channel Ports Ch-Type Hash Type Min-links Local Prf Rx Util Tx Util
------- ----------------------------- -------- --------- --------- --------- --------- ---------
Po10 Active: Te1/0/1 Dynamic 7 1 Disabled 0 0
Inactive: Te1/0/2
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
May 13th, 2019 10:00
Hi,
You should be able to use multiple links for peering. https://downloads.dell.com/manuals/common/powerconnect_nx00-usingmlag-whtppr_en-us.pdf Page 11. Is the firmware up to date?
MikkelN
3 Posts
0
May 19th, 2019 12:00
And yes i have updated the firmware to latest.
MikkelN
3 Posts
0
May 19th, 2019 12:00
Hi Josh,
I'm not able to see the webpage which you have linked.