Reinitializing the Dell EMC Unity OE should be considered a last resort, and by its nature is destructive, completely removing all data and configuration that may already exist. This procedure will reset the system to a 'back-to-factory' state based on the same OE version that was last in use.
WARNING: This is a destructive procedure and all of the system data will be erased.
Reinitializing the Unity OE should be considered a last resort, as it is completely destructive, and removes all data and configuration that may exist.
ayas
Moderator
Moderator
•
6.7K メッセージ
0
2019年8月14日 18:00
zawa7さん
BackRevも、Reinitも工場出荷状態への初期化なのでユーザデータを含むはすべて失われます。それぞれのKBにも同じように以下の文言が添えられているのでVersion以外でReinitとBackrevで変化点はないです。
GUIでReinit >
485393 : Dell EMC Unity: Reinitializing the Unity Operating Environment (OE) with the same version as on the Array (Dell EMC Correctable)
Reinitializing the Dell EMC Unity OE should be considered a last resort, and by its nature is destructive, completely removing all data and configuration that may already exist. This procedure will reset the system to a 'back-to-factory' state based on the same OE version that was last in use.
USBを使用して>
478689 : Dell EMC Unity: Performing a software reinitialization of the Unity Operating Environment (OE) using Bootable USB Drive images
WARNING: This is a destructive procedure and all of the system data will be erased.
Reinitializing the Unity OE should be considered a last resort, as it is completely destructive, and removes all data and configuration that may exist.
BackRevを実施>
494854 : Dell EMC Unity: Array CLI Reinit to new OE version using uploaded image (Dell EMC Correctable)
WARNING: This is a destructive procedure and all of the system data will be erased.
またこちらのスレッドでもBackRevはユーザデータ含む構成情報はすべて破棄されるとあります。
OEアップに関するスタンスについて
Reinitializing the Unity Operating Environment to a Lower Software Version