Unsolved
3 Posts
0
919
warning: corruted bootorder variable detected..repaired. entering life cycle co
Hai,
after reset idrac & bios , server (power edge R720) directly going to life cycle menu, after entering life cycle it showing "warning: corrupted boot order variable detected..repaired. entering life cycle controller". then it will restart automatically,
i check all devices, remove HDD, power off etc...
help me please
DELL-Joey C
Moderator
Moderator
•
3.4K Posts
0
October 29th, 2019 23:00
Hi,
Does it go into a boot loop?
Since you have done a BIOS reset, it should be relate to the settings in the BIOS and OS which was installed in. If there is any changes in BIOS, the OS will not be able to register. I suggest you to look into the BIOS settings, and figure which was the previous setting which was configured, such as UEFI or BIOS mode.
What OS are you running in the server?
FASILp8288
3 Posts
0
November 1st, 2019 05:00
windows server 2008 sr2