82 Posts
0
617
mminfo not getting all ssid
Hi everyone:
I am moving manually with nsrclone from disk to tape, everything is working well. I can see the savesets on the tape via GUI.
But when i try to list all the files on tape with mminfo, the savesets moved manually with nsrclone not showing at all
mminfo -xc; -q "Volume=GYN397L4,family=tape,copies=1" -r volume,ssid,cloneid,clretent,savetime,sscreate,sscomp,group,level,sumflags,sumsize,name > D:\RPT\serv02\serv02_lista_TapeGYN397L4_sscreate_All.txt
Thanks in Advance
Dsantibanez
82 Posts
0
January 16th, 2020 06:00
Wow, that was simple and do the trick. So the copies parameter query all ssid backedup independent if I look up for an specific volume, pool or client.
Thanks again and again @bingo.1
bingo.1
2.4K Posts
0
January 16th, 2020 06:00
Set copies=2 because there are 2 instances of the save set once it has been cloned.
bingo.1
2.4K Posts
1
January 16th, 2020 07:00
My pleasure.
You could also say "copies = number of save set instances".
The ssid will remain the same but the cloneid will be different (it is just a UNIX/Epoch timestamp).
Consequently the first instance (the backup) will carry a smaller cloneid than the clone which must be run after the backup has finished.