4 Posts
0
1885
Recovery virtual disk on a R520
Hi,
Problem on a Dell R520 server with a H310 raid controller.
After a bad manipulation in the LifeCycle Controller, the virtual disk of the system has been delete.
Is it possible to re-create this virtual disk without erasing the data?
Or simply access essential data before formatting on one of the SAS system disks.
Thank you in advance
Christophe
Dell-DylanJ
4 Operator
4 Operator
•
2.9K Posts
0
April 22nd, 2020 14:00
If a initialization operation has run, then the data would be lost. If you had an accident in the Lifecycle controller, I suspect that you have most likely lost data from an automatic initialization.
If no initialization took place, then you could theoretically perform a retag and be fine. A retag would just mean creating a virtual disk with the identical settings as the previous virtual disk, but when prompted to perform an initialization, you have to make sure to *not* do it. This procedure would be within the PERC configuration menu.
savf
4 Posts
0
April 23rd, 2020 00:00
Thank's a lot. That was a good solution to recreate the disk without initalized.
You saved me many hours of reconfiguration.
You are realy great to take the time to answer me.
Cordialy
Christophe