Unsolved
60 Posts
0
2687
How To Disable TLS1.0 on VNX Block array
We have a requirement to disable TLS1.0 and 1.1 on VNX block array, below KB article only speak about file component. Could someone please share if you have a workaround or solution.
Unsolved
60 Posts
0
2687
We have a requirement to disable TLS1.0 and 1.1 on VNX block array, below KB article only speak about file component. Could someone please share if you have a workaround or solution.
Top
eerreer
130 Posts
0
April 22nd, 2020 13:00
You can disable TLS 1.0/TLS 1.1 in the latest VNX2 OE:
Release notes here:
https://support.emc.com/docu98061_VNX-Operating-Environment-for-Block-05.33.021.5.256,-File-8.1.21.256-and-EMC-Unisphere-1.3.21.1.0256-1-Release-Notes.pdf?language=en_US
Security & Configuration guide here:
https://support.emc.com/docu48491_Security_Configuration_Guide_for_VNX.pdf?language=en_US&source=Coveo
eerreer
130 Posts
0
April 30th, 2020 09:00
The security config guide calls out that disabling TLS 1.0 on your network/switches will impact ESRS functions, as well as Unisphere Service Manager.
AshJo
60 Posts
0
April 30th, 2020 09:00
Thank you for your response. But Disabling TLS1.0 will not support ESRS right ?
AshJo
60 Posts
0
May 5th, 2020 08:00
Thank you for your response