Unsolved
3 Posts
0
1580
RecoverPoint Metropoint and SRM
Hi,
I would like know how to integrate SRM with a recoverpoint metropoint solution in which there are two RP clusters in Site 1 and Site 2 connected via VPLEX and 1st vCenter and one RP cluster in site 3 and 2nd vCenter.
How SRM will be deployed in such a scenario when there are two RP clusters in the Protected site and both are replicating to the 3rd site RP cluster.
One array pair can be established between site 1 and site 3 RPs however if site 1 RP goes down, the RP of site 2 will perform the replication to site 3 but SRM will not know about it. How are things going to work in such case.
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
May 21st, 2020 10:00
Hello CloudWonders
Here is the link to Dell EMC SRM 4.4.x Product Documentation Index which has the deployment & configuration guides as well.
https://dell.to/3cTkLaO
Please let us know if you have any other questions.
CloudWonders
3 Posts
0
May 25th, 2020 09:00
Hi
Here I am talking about VMware SRM not EMC SRM.
Thanks.
Idan
675 Posts
0
June 3rd, 2020 11:00
There's an option to configure recovery copy in RP under external management (copy policy-based) which is available only for remote copies.
CloudWonders
3 Posts
0
June 17th, 2020 06:00
Can you elaborate a bit further as how setting this option would help in this scenario. Thanks.
Idan
675 Posts
0
June 25th, 2020 02:00
That's how you can determine how each CG would be treated from an SRM standpoint.