Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

B

BarryK80

5 Posts

54894

December 22nd, 2004 19:00

Current firmware for 3024?

I'm looking for the current 'stable' version of the firmware for the 3024.  Can anyone point me to the file?  For some reason I can't seem to find it  (6.1.4 or 6.1.5) on Dell's site.
 
Thanks,
 
Barry

DELL-GregM

112 Posts

December 27th, 2004 18:00

6.1.4 is the latest public release, but 6.1.5 is what I recommend.  You can get to 6.1.4 through the Network Drivers section instead of Firmware.
 
Also, check your email.

hckrphil

6 Posts

January 5th, 2005 17:00

Where can I find 6.1.5 for the Dell PowerConnect 3024?  Thanks!
~Phil

hckrphil

6 Posts

January 5th, 2005 19:00

Any major difference between the public 6.1.4 release and the super top secret 6.1.5?  Thanks.  :smileytongue:
 
~Phil

DELL-GregM

112 Posts

January 5th, 2005 19:00

You have to get it from someone in support, it is not on the web.

In your case, check your email :)

skyking60

6 Posts

February 23rd, 2005 01:00

I'd be needing the super top secret 6.1.5, of you could mail it to me:)

Ranger73

1 Message

April 12th, 2005 13:00

I'd like to jump on the 6.1.5 bandwagon, as well. 

Thank you.

DIVIDEDSPACE

2 Posts

May 23rd, 2005 19:00

I'd like to use the 6.1.5 firmware. Is this still the newest?

gsgleason

3 Posts

June 14th, 2005 19:00

Please email me the 6.1.5 firmware as well.

Do I need to update the boot ROM version as well as the software version?

DELL-GregM

112 Posts

June 29th, 2005 14:00

Firmware has been emailed =)
 
I recommend you default the switch after going to 6.1.5 and re-do your config.  Also, this is just a software upgrade, the Boot ROM is fine and will stay the same.

ilaidlaw

1 Message

January 28th, 2006 20:00

Is it still possible to get the 6.1.5 version of the firmware?

Thanks!

ad_vlad

2 Posts

July 19th, 2006 19:00

Hi,
 I badly need the firmware 6.1.5 for the PowerConnect 3024 switches.
 I got 2 of them in a stack and they are hanging up badly with the 6.1.2 firmware. I can't pin it down nowere and the only thing that is spamming my console is :
"sif_pkt_alloc: dblk allocate failed".
 I'm from Eastern Europe and the support here has closed at this hour. Can someone please help me tonight (my time).
 
 

dhquebbeman

7 Posts

November 23rd, 2006 18:00

Hi Greg,
 
We were about to toss out 5 3024s, due to hanging issues, all of them at 6.1.2.3921. I would really like to try this 6.1.5 firmware, or newer if one ever came out.
 
Thanks in advance,
-doug quebbeman
senior systems administrator
the estopinal group
 

newmediallc

5 Posts

March 3rd, 2007 22:00

Moderator - sorry, this is a duplicate post, you can remove it. Real post is below.
 
Thanks!
 
Ed LaFrance


Message Edited by newmediallc on 03-03-2007 06:54 PM

newmediallc

5 Posts

March 3rd, 2007 22:00

Hello - I would also like to be emailed the 6.1.5 firmware - having a locking issue with a 3024 running the 6.1.2 firmware (switch stops responding, lights all flash rapidly) and I've read here that the upgrade could solve the problem. Please email it to me. One question: will the switch lose it's IP setting when I upgrade? It is in a remote location, and if it will, I will have to take that into consideration.
 
Thanks!
 
Ed

BigBen2k

1 Message

March 25th, 2007 18:00

Hi! I'd also like to get the latest firmware for my 3024. I'm running 6.1.2 , I can't find 6.1.4 anywhere even after extensive searches, and certainly wouldn't mind getting a hold of 6.1.5 ! Please advise, Ben

View More

View All

No Events found!

Top