‎FN410T | DELL Technologies

Start a Conversation

UNSOLVED

Arn7

updated

8 years ago

Arn7

2 Posts

0

2195

May 17th, 2018 03:00

FN410T

Im currently configuring FN410Tx2 connected to Chassis fx2 and with 6 x FC430

Chassis Management IP is 10.67.194.X

Then I configured the Blade I/O Manager with same subnet 10.67.194.X

FN410T is configured as default

the 6 x FC430 is also configured same subnet 10.67.194.X

the problem is when I connect the a Connect to any external port 9 , 10, 11 and 12

I/O Manager becomes disconnected. but the Server (6xFC430) is still connected.

Please help me

Thanks

DM
Daniel My
12 Elder
•
6205 Posts
2016
0
Posted May 17th, 2018 11:00
Hello

I suggest reviewing the manuals in regard to default configurations and setup instructions. You can find manuals for the hardware listed under the FX2 chassis support page.

http://www.dell.com/support/

If a network link is functional and becomes non-functional when another link is established then it is most likely due to some type of frame/packet control or security feature. This is typically caused by improper setup and configuration. I suggest that you review your configuration for issues.

Thanks
A
Arn7
2 Posts
1998
0
Posted May 20th, 2018 04:00
in the machine, there is description / related topic regarding on my issue.
DM
Daniel My
12 Elder
•
6205 Posts
1979
0
Posted May 23rd, 2018 09:00

@Arn7 wrote:

in the machine, there is description / related topic regarding on my issue.

If you have additional information relevant to the issue then I suggest posting it into the forum so that the community can better assist you.

Thanks