Hello,

I have a requirement to test migration between san's from different vendors, in this case it is from a clariion cx700 and an hds ams 2100, both arrays are on the same fabric. I am just wondering if there are any issues, or gotchas that would possibly occur if I were to zone the host in to both arrays? The idea would be to zone one hba to one array and the other hba to the other array.

If anyone has any experience or suggestion on the best way to achieve this, that would be great. I just don't relish the idea of backing up luns on one array, disconnecting the storage from the host, then zoning it into the new array and restoring the data.

Thanks in advance,

Cheers,

Tim.