UNISPHERE

Question

Hello everybody, I have a question. I have a CX4-120 clariion with flare 29. Have I upgrade flare in the Clariion to have the new Unisphere?. Is there any simulator or training of this tools?. Thanks,

Roops1 · Accepted Answer

Hi,

I think i uploaded the wrong one. below mentioned is the correct link.

EMC Unisphere - Next Generation Storage Management Simplicity

http://www.youtube.com/watch?v=mACVdai9YwE

Mark it answered if this answer your question.

AranH1 · Answer

Unisphere is the interface for FLARE 30 I believe, and you have to upgrade the array to FLARE 30 to be able to use it. Contact your local CE or account exec to plan it out. It should show up as a download in the software downloads section under CX4. If your array is registered properly you should have access to that section.

Roops1 · Answer

Hi,

Please check this document on Powerlink that will give you a brief overvierw of Unisphere:

Introducing EMC Unisphere - A Common Midrange Element Manager

Home > Support > Technical Documentation and Advisories > White Papers > All White Papers

jmaguileramontero · Answer

Thanks you very much for all fro your responses. I would like to know if there is a training to Unisphere.

Roops1 · Answer

Hi Jose, Also check below link which i could find out from youtube. EMC Unified - Simple & Efficient - Native FCoE Hot Add http://www.youtube.com/watch?v=6S3PJZGzSXU Thanks.

jmaguileramontero · Answer

Thanks a lot Roops.

Mohammad_akkoub · Answer

Hi Guys is the simulator available or not ?

CLARiiON

UNISPHERE

Was this post helpful?