UNSOLVED
Incorrect Package
I'm attempting to push out a DRAC update for a M710HD to go from 3.21 to 3.50. Reviewing the system update logs, it's copying the package "ESM_Firmware_C1GG0_WN32_3.50_A00.EXE" which is the Windows update utility. This device is running ESXi and I'm pushing the update via the iDRAC method. Why would it be downloading the incorrect update package?
DELL-Raj S
327 Posts
638
0
Posted April 16th, 2013 10:00
Looks like the firmware update was successful as per this job: JID_001343850494
If you see an update fail in OME, please run the above command and share the results. This will give us more info on the error that happened.
DELL-Raj S
327 Posts
638
0
Posted April 16th, 2013 10:00
Failure could be attributed to various reasons. Downloading wrong package usually does not happen.
What is the iDRAC and LC firmware version on M710HD ?
Please run this command from OME system (from OS command prompt) to check job status and share the results:
winrm e cimv2/root/dcim/DCIM_LifecycleJob -u:username -p:password -SkipCNcheck -SkipCAcheck -r:https://iDRAC IPAddress/wsman:443 -auth:basic -encoding:utf-8
Provide actual values for username, password and iDRAC IP Address in the above command syntax.
The DRAC firmware level was 3.21 and the LC Firmware is 1.5.0.672. After the OME failure I manually updated the DRAC to 3.5 so I'm not sure the command will help, but the output is below.
DCIM_LifecycleJob
Caption
CommunicationStatus
DeleteOnCompletion
Description
DetailedStatus
ElapsedTime
ElementName
ErrorCode
ErrorDescription
HealthState
InstallDate
InstanceID = JID_CLEARALL
JobRunTimes
JobStartTime = TIME_NA
JobState
JobStatus = Pending
JobUntilTime = TIME_NA
LocalOrUtcTime
Message = NA
MessageArguments
MessageID = NA
Name = CLEARALL
Notify
OperatingStatus
OtherRecoveryAction
Owner
PercentComplete = 0
PrimaryStatus
Priority
RecoveryAction
RunDay
RunDayOfWeek
RunMonth
RunStartInterval
ScheduledStartTime
StartTime
Status
TimeBeforeRemoval
TimeOfLastStateChange
TimeSubmitted
UntilTime
DCIM_LifecycleJob
Caption
CommunicationStatus
DeleteOnCompletion
Description
DetailedStatus
ElapsedTime
ElementName
ErrorCode
ErrorDescription
HealthState
InstallDate
InstanceID = JID_001343850494
JobRunTimes
JobStartTime = 20191010101010
JobState
JobStatus = COMPLETED
JobUntilTime = 2009:8:11
LocalOrUtcTime
Message = The command was successful
MessageArguments
MessageID = LC001
Name = LC Config
Notify
OperatingStatus
OtherRecoveryAction
Owner
PercentComplete = NA
PrimaryStatus
Priority
RecoveryAction
RunDay
RunDayOfWeek
RunMonth
RunStartInterval
ScheduledStartTime
StartTime
Status
TimeBeforeRemoval
TimeOfLastStateChange
TimeSubmitted
UntilTime
DELL-Nitin Bh
43 Posts
638
0
Posted April 16th, 2013 01:00
Hi,
Thanks for the post.
When you perform System Update task using iDRAC method it will always download a windows
packages. IDRAC update mode is independent of OS.
The package you are seeing is not an invalid package : (ESM_Firmware_C1GG0_WN32_3.50_A00.EXE)
Thanks,
Nitin